|
Storage
and retrieval machines
(high-bay warehouse)
Carriages, lifting and lowering
stations and traversing carriages are positioned by one reading
head each
|
|
Lifts
and lifting/lowering stations
The
WCS3A reading head scans the code rail without contact. it is
silent, no mechanical and long service lift.
Acceleration
and braking ramps can be optimised by means of the continuous
positional measurement.
The mounting brackets for the code rail permit quick and easy
installation of the code rail in the lift shaft.
|
|
Studio
and theatre equipment
In television studios and theatres, the WCS is used for
positioning studio/stage lighting and revolving stages.
Its characteristics such as silent operation, long service
life and reliability offer the user many advantages.
If it should be necessary to replace a reading head, it can be
dismantled and refitted within a few seconds
|
|
Back to
Position encoding system main page
|
|
|
Automatic
cranes
The
crane is positioned by a reading head for both crane and cross
travel.
As an option, brushes for cleaning the code rail can be fitted
to the guide trolley. The WCS2A can then also be used in very
dusty ambiences, e.g. in cement plants or foundries.
กก |
|
Galvanising
plants
One
or more carriages travel behind one another on a straight
runway a straight runway
[
Top ]
กก |
|
Overhead
conveyors
Branches
(switch points) and bends are possible.
The WCS can also be used for routes longer than 327 m.
|
|
Vehicle
Indentification
A
short section of code rail is attached to each vehicle, the
reading head is fixed.
With a length of code rail of 20 cm on each vehicle, over
1,500 vehicles can be differently coded.
|
[
Top ]
|
